Add build and doc files along with hinic_pmd_ethdev.c
which just includes PMD register and log initialization
for compilation.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Rather than using linuxapp and bsdapp everywhere, we can change things to
use the, more readable, terms "linux" and "freebsd" in our build configs.
Rather than renaming the configs we can just duplicate the existing ones
with the new names using symlinks, and use the new names exclusively
internally. ["make showconfigs" also only shows the new names to keep the
list short] The result is that backward compatibility is kept fully but any
new builds or development can be done using the newer names, i.e. both
"make config T=x86_64-native-linuxapp-gcc" and "T=x86_64-native-linux-gcc"
work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
IXGBE vector PMD was re-enabled for 32 bits, but only for gcc.
This commit enables it for icc too.
Fixes: e6672d2f0f ("net/ixgbe: enable ixgbe vector PMD for i686")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Before, we were aggregating multiple pages into one memseg, so the
number of memsegs was small. Now, each page gets its own memseg,
so the list of memsegs is huge. To accommodate the new memseg list
size and to keep the under-the-hood workings sane, the memseg list
is now not just a single list, but multiple lists. To be precise,
each hugepage size available on the system gets one or more memseg
lists, per socket.
In order to support dynamic memory allocation, we reserve all
memory in advance (unless we're in 32-bit legacy mode, in which
case we do not preallocate memory). As in, we do an anonymous
mmap() of the entire maximum size of memory per hugepage size, per
socket (which is limited to either RTE_MAX_MEMSEG_PER_TYPE pages or
RTE_MAX_MEM_MB_PER_TYPE megabytes worth of memory, whichever is the
smaller one), split over multiple lists (which are limited to
either RTE_MAX_MEMSEG_PER_LIST memsegs or RTE_MAX_MEM_MB_PER_LIST
megabytes per list, whichever is the smaller one). There is also
a global limit of CONFIG_RTE_MAX_MEM_MB megabytes, which is mainly
used for 32-bit targets to limit amounts of preallocated memory,
but can be used to place an upper limit on total amount of VA
memory that can be allocated by DPDK application.
So, for each hugepage size, we get (by default) up to 128G worth
of memory, per socket, split into chunks of up to 32G in size.
The address space is claimed at the start, in eal_common_memory.c.
The actual page allocation code is in eal_memalloc.c (Linux-only),
and largely consists of copied EAL memory init code.
Pages in the list are also indexed by address. That is, in order
to figure out where the page belongs, one can simply look at base
address for a memseg list. Similarly, figuring out IOVA address
of a memzone is a matter of finding the right memseg list, getting
offset and dividing by page size to get the appropriate memseg.
This commit also removes rte_eal_dump_physmem_layout() call,
according to deprecation notice [1], and removes that deprecation
notice as well.
On 32-bit targets due to limited VA space, DPDK will no longer
spread memory to different sockets like before. Instead, it will
(by default) allocate all of the memory on socket where master
lcore is. To override this behavior, --socket-mem must be used.
The rest of the changes are really ripple effects from the memseg
change - heap changes, compile fixes, and rewrites to support
fbarray-backed memseg lists. Due to earlier switch to _walk()
functions, most of the changes are simple fixes, however some
of the _walk() calls were switched to memseg list walk, where
it made sense to do so.
Additionally, we are also switching locks from flock() to fcntl().
Down the line, we will be introducing single-file segments option,
and we cannot use flock() locks to lock parts of the file. Therefore,
we will use fcntl() locks for legacy mem as well, in case someone is
unfortunate enough to accidentally start legacy mem primary process
alongside an already working non-legacy mem-based primary process.
[1] http://dpdk.org/dev/patchwork/patch/34002/
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Adds the initial framework for registering the driver against the support
PCI device identifiers.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Enable the PMD by default on supported configurations.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added new SW PMD which makes use of the libsso SW library,
which provides wireless algorithms ZUC EEA3 and EIA3
in software.
This PMD supports cipher-only, hash-only and chained operations
("cipher then hash" and "hash then cipher") of the following
algorithms:
- RTE_CRYPTO_SYM_CIPHER_ZUC_EEA3
- RTE_CRYPTO_SYM_AUTH_ZUC_EIA3
The ZUC hash and cipher algorithms, which are enabled
by this crypto PMD are implemented by Intel's libsso software
library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Added new SW PMD which makes use of the libsso_kasumi SW library,
which provides wireless algorithms KASUMI F8 and F9
in software.
This PMD supports cipher-only, hash-only and chained operations
("cipher then hash" and "hash then cipher") of the following
algorithms:
- RTE_CRYPTO_SYM_CIPHER_KASUMI_F8
- RTE_CRYPTO_SYM_AUTH_KASUMI_F9
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch provides the implementation of an AES-NI accelerated crypto PMD
which is dependent on Intel's multi-buffer library, see the white paper
"Fast Multi-buffer IPsec Implementations on Intel® Architecture Processors"
This PMD supports AES_GCM authenticated encryption and authenticated
decryption using 128-bit AES keys
The patch also contains the related unit tests functions
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John Griffin <john.griffin@intel.com>
Intel Architecture (IA), also called x86, is declined in
- i686
- x86_x32
- x86_64
The code common to all of these architectures can now be guarded
by a single flag RTE_ARCH_X86.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Comments to help on basic configuration are already located
in common configs.
No need to duplicate (and maintain) them in inherited configurations.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
New file containing optimized receive and transmit functions which
use 128bit vector instructions to improve performance. When conditions
permit, these functions will be enabled at runtime by the device
initialization routines already in the PMD.
The compilation of the vectorized RX and TX code paths is controlled by
a new setting in the build time configuration for the IXGBE driver. Also
added is a setting which allows an optional further performance increase
by disabling the use of the olflags field on packet RX.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: XiaonanX Zhang <xiaonanx.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: code-style adjustments]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The "default" part in configuration filenames is misleading.
Rename this as "native", as this is the RTE_MACHINE that is set in these files.
This should make it clearer for people who build DPDK on a system then run it on
another one.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2014-05-21 16:25:06 +02:00
Renamed from config/defconfig_i686-default-linuxapp-icc (Browse further)
