Use C11 atomic builtins with explicit ordering instead of rte_atomic
ops which enforce unnecessary barriers on aarch64.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Suggested-by: Dodji Seketeli <dodji@redhat.com>
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The event status is defined as a volatile variable and shared between
threads. Use C11 atomic built-ins with explicit ordering instead of
rte_atomic ops which enforce unnecessary barriers on aarch64.
The event status has been cleaned up by the compare-and-swap operation
when we free the event data, so there is no need to set it to invalid
after that.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Harman Kalra <hkalra@marvell.com>
Having a special versioning for experimental/internal libraries put a
additional maintenance cost while this status is already announced in
MAINTAINERS and the library headers/documentation.
Following discussions and vote at 05/20 TB meeting [1], use a single
versioning for all libraries in DPDK.
Note: for the ABI check, an exception [2] had been added when tweaking
this special versioning [3].
Prefer explicit libabigail rules (which will be dropped in 20.11).
1: https://mails.dpdk.org/archives/dev/2020-May/168450.html
2: https://git.dpdk.org/dpdk/commit/?id=23d7ad5db41c
3: https://git.dpdk.org/dpdk/commit/?id=ec2b8cd7ed69
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
This patch also removes two symbols, which are not to be exported.
rte_dpaa_mem_ptov - static inline in the headerfile
fman_ccsr_map_fd - local shared variable.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
This patch also removes two symbols, which were not used
anywhere else i.e. rte_fslmc_vfio_dmamap & dpaa2_get_qbman_swp
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Move mlx5 symbols in the map file to the INTERNAL section and add
__internal tags to their definitions.
Those symbols were exported in 20.02 and now (20.05) they are removed.
Avoid ABI comparison issues between 20.05/20.08 and 20.02 by adding the
suppress_file directive to libabigail.abignore file. This directive will
prevent loading mlx5 common symbols and no comparison will be performed.
In addition move symbols from the EXPERIMENTAL section to the INTERNAL
section.
Fixes: 7b4f1e6bd3 ("common/mlx5: introduce common library")
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Move the internal symbols to INTERNAL sections so that any
change in them is not reported as ABI breakage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Move the internal symbols to INTERNAL sections so that any
change in them is not reported as ABI breakage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Signed-off-by: David Marchand <david.marchand@redhat.com>
This patch adds versioned function rte_cryptodev_info_get()
to prevent some issues with ABI policy.
Node v21 works in same way as before, returning driver capabilities
directly to the API caller. These capabilities may include new elements
not part of the v20 ABI.
Node v20 function maintains compatibility with v20 ABI releases
by stripping out elements not supported in v20 ABI. Because
rte_cryptodev_info_get is called by other API functions,
rte_cryptodev_sym_capability_get function is versioned the same way.
Fixes: b922dbd38c ("cryptodev: add ChaCha20-Poly1305 AEAD algorithm")
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds CPU flags which will enable the detection of ISA
features available on more recent x86 based CPUs.
The CPUID leaf information can be found in
Table 1-2. "Information Returned by CPUID Instruction" of this document:
https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf
The following CPU flags are added in this patch:
- AVX-512 doubleword and quadword instructions.
- AVX-512 integer fused multiply-add instructions.
- AVX-512 conflict detection instructions.
- AVX-512 byte and word instructions.
- AVX-512 vector length instructions.
- AVX-512 vector bit manipulation instructions.
- AVX-512 vector bit manipulation 2 instructions.
- Galois field new instructions.
- Vector AES instructions.
- Vector carry-less multiply instructions.
- AVX-512 vector neural network instructions.
- AVX-512 for bit algorithm instructions.
- AVX-512 vector popcount instructions.
- Cache line demote instructions.
- Direct store instructions.
- Direct store 64B instructions.
- AVX-512 two register intersection instructions.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Change references to ABI 20.0.1 to use ABI v21, see
https://doc.dpdk.org/guides/contributing/abi_policy.html#general-guidelines
"Major ABI versions are declared no more frequently than yearly.
Compatibility with the major ABI version is mandatory in subsequent
releases until a new major ABI version is declared."
Combined ABI policy and versioning in maintainers, add map files to the
filter to more closely monitor future ABI changes.
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Ignore the internal version ABI check, this kind of ABI is used only
by drivers and libraries.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
One of the reasons to destroy a flow is the fact that no packet matches
the flow for "timeout" time.
For example, when TCP\UDP sessions are suddenly closed.
Currently, there is not any DPDK mechanism for flow aging and the
applications use their own ways to detect and destroy aged-out flows.
The flow aging implementation need include:
- A new rte_flow action: RTE_FLOW_ACTION_TYPE_AGE to set the timeout and
the application flow context for each flow.
- A new ethdev event: RTE_ETH_EVENT_FLOW_AGED for the driver to report
that there are new aged-out flows.
- A new rte_flow API: rte_flow_get_aged_flows to get the aged-out flows
contexts from the port.
- Support input flow aging command line in Testpmd.
The new event type addition in the enum is flagged as an ABI breakage,
so an ignore rule is added for these reasons:
- It is not changing value of existing types (except MAX)
- The new value is not used by existing API if the event is not
registered
In general, it is safe adding new ethdev event types at the end of the
enum, because of event callback registration mechanism.
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Introduce relaxed tail sync (RTS) mode for MT ring synchronization.
Aim to reduce stall times in case when ring is used on
overcommited cpus (multiple active threads on the same cpu).
The main difference from original MP/MC algorithm is that
tail value is increased not by every thread that finished enqueue/dequeue,
but only by the last one.
That allows threads to avoid spinning on ring tail value,
leaving actual tail value change to the last thread in the update queue.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
For normal developers, those checks are disabled.
Enabling them requires a configuration that will trigger the ABI dumps
generation as part of the existing devtools/test-build.sh and
devtools/test-meson-builds.sh scripts.
Those checks are enabled in the CI for the default meson options on x86
and aarch64 so that proposed patches are validated via our CI robot.
A cache of the ABI is stored in travis jobs to avoid rebuilding too
often.
Checks can be informational only, by setting ABI_CHECKS_WARN_ONLY when
breaking the ABI in a future release.
Explicit suppression rules have been added on internal structures
exposed to crypto drivers as the current ABI policy does not apply to
them.
This could be improved in the future by carefully splitting the headers
content with application and driver "users" in mind.
We currently have issues reported for librte_crypto recent changes for
which suppression rules have been added too.
Mellanox glue libraries are explicitly skipped as they are not part of
the application ABI.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
