dpdk-fm10k/drivers/net/virtio/virtqueue.h
Thomas Monjalon f35e5b3e07 replace alignment attributes
There is a common macro __rte_aligned for alignment,
which is now used where appropriate for consistency.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
2020-04-16 18:16:18 +02:00

562 lines
16 KiB
C

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright(c) 2010-2014 Intel Corporation
*/
#ifndef _VIRTQUEUE_H_
#define _VIRTQUEUE_H_
#include <stdint.h>
#include <rte_atomic.h>
#include <rte_memory.h>
#include <rte_mempool.h>
#include "virtio_pci.h"
#include "virtio_ring.h"
#include "virtio_logs.h"
#include "virtio_rxtx.h"
struct rte_mbuf;
/*
* Per virtio_ring.h in Linux.
* For virtio_pci on SMP, we don't need to order with respect to MMIO
* accesses through relaxed memory I/O windows, so smp_mb() et al are
* sufficient.
*
* For using virtio to talk to real devices (eg. vDPA) we do need real
* barriers.
*/
static inline void
virtio_mb(uint8_t weak_barriers)
{
if (weak_barriers)
rte_smp_mb();
else
rte_mb();
}
static inline void
virtio_rmb(uint8_t weak_barriers)
{
if (weak_barriers)
rte_smp_rmb();
else
rte_cio_rmb();
}
static inline void
virtio_wmb(uint8_t weak_barriers)
{
if (weak_barriers)
rte_smp_wmb();
else
rte_cio_wmb();
}
static inline uint16_t
virtqueue_fetch_flags_packed(struct vring_packed_desc *dp,
uint8_t weak_barriers)
{
uint16_t flags;
if (weak_barriers) {
/* x86 prefers to using rte_smp_rmb over __atomic_load_n as it reports
* a better perf(~1.5%), which comes from the saved branch by the compiler.
* The if and else branch are identical with the smp and cio barriers both
* defined as compiler barriers on x86.
*/
#ifdef RTE_ARCH_X86_64
flags = dp->flags;
rte_smp_rmb();
#else
flags = __atomic_load_n(&dp->flags, __ATOMIC_ACQUIRE);
#endif
} else {
flags = dp->flags;
rte_cio_rmb();
}
return flags;
}
static inline void
virtqueue_store_flags_packed(struct vring_packed_desc *dp,
uint16_t flags, uint8_t weak_barriers)
{
if (weak_barriers) {
/* x86 prefers to using rte_smp_wmb over __atomic_store_n as it reports
* a better perf(~1.5%), which comes from the saved branch by the compiler.
* The if and else branch are identical with the smp and cio barriers both
* defined as compiler barriers on x86.
*/
#ifdef RTE_ARCH_X86_64
rte_smp_wmb();
dp->flags = flags;
#else
__atomic_store_n(&dp->flags, flags, __ATOMIC_RELEASE);
#endif
} else {
rte_cio_wmb();
dp->flags = flags;
}
}
#ifdef RTE_PMD_PACKET_PREFETCH
#define rte_packet_prefetch(p) rte_prefetch1(p)
#else
#define rte_packet_prefetch(p) do {} while(0)
#endif
#define VIRTQUEUE_MAX_NAME_SZ 32
#ifdef RTE_VIRTIO_USER
/**
* Return the physical address (or virtual address in case of
* virtio-user) of mbuf data buffer.
*
* The address is firstly casted to the word size (sizeof(uintptr_t))
* before casting it to uint64_t. This is to make it work with different
* combination of word size (64 bit and 32 bit) and virtio device
* (virtio-pci and virtio-user).
*/
#define VIRTIO_MBUF_ADDR(mb, vq) \
((uint64_t)(*(uintptr_t *)((uintptr_t)(mb) + (vq)->offset)))
#else
#define VIRTIO_MBUF_ADDR(mb, vq) ((mb)->buf_iova)
#endif
/**
* Return the physical address (or virtual address in case of
* virtio-user) of mbuf data buffer, taking care of mbuf data offset
*/
#define VIRTIO_MBUF_DATA_DMA_ADDR(mb, vq) \
(VIRTIO_MBUF_ADDR(mb, vq) + (mb)->data_off)
#define VTNET_SQ_RQ_QUEUE_IDX 0
#define VTNET_SQ_TQ_QUEUE_IDX 1
#define VTNET_SQ_CQ_QUEUE_IDX 2
enum { VTNET_RQ = 0, VTNET_TQ = 1, VTNET_CQ = 2 };
/**
* The maximum virtqueue size is 2^15. Use that value as the end of
* descriptor chain terminator since it will never be a valid index
* in the descriptor table. This is used to verify we are correctly
* handling vq_free_cnt.
*/
#define VQ_RING_DESC_CHAIN_END 32768
/**
* Control the RX mode, ie. promiscuous, allmulti, etc...
* All commands require an "out" sg entry containing a 1 byte
* state value, zero = disable, non-zero = enable. Commands
* 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
* Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
*/
#define VIRTIO_NET_CTRL_RX 0
#define VIRTIO_NET_CTRL_RX_PROMISC 0
#define VIRTIO_NET_CTRL_RX_ALLMULTI 1
#define VIRTIO_NET_CTRL_RX_ALLUNI 2
#define VIRTIO_NET_CTRL_RX_NOMULTI 3
#define VIRTIO_NET_CTRL_RX_NOUNI 4
#define VIRTIO_NET_CTRL_RX_NOBCAST 5
/**
* Control the MAC
*
* The MAC filter table is managed by the hypervisor, the guest should
* assume the size is infinite. Filtering should be considered
* non-perfect, ie. based on hypervisor resources, the guest may
* received packets from sources not specified in the filter list.
*
* In addition to the class/cmd header, the TABLE_SET command requires
* two out scatterlists. Each contains a 4 byte count of entries followed
* by a concatenated byte stream of the ETH_ALEN MAC addresses. The
* first sg list contains unicast addresses, the second is for multicast.
* This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
* is available.
*
* The ADDR_SET command requests one out scatterlist, it contains a
* 6 bytes MAC address. This functionality is present if the
* VIRTIO_NET_F_CTRL_MAC_ADDR feature is available.
*/
struct virtio_net_ctrl_mac {
uint32_t entries;
uint8_t macs[][RTE_ETHER_ADDR_LEN];
} __attribute__((__packed__));
#define VIRTIO_NET_CTRL_MAC 1
#define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
#define VIRTIO_NET_CTRL_MAC_ADDR_SET 1
/**
* Control VLAN filtering
*
* The VLAN filter table is controlled via a simple ADD/DEL interface.
* VLAN IDs not added may be filtered by the hypervisor. Del is the
* opposite of add. Both commands expect an out entry containing a 2
* byte VLAN ID. VLAN filtering is available with the
* VIRTIO_NET_F_CTRL_VLAN feature bit.
*/
#define VIRTIO_NET_CTRL_VLAN 2
#define VIRTIO_NET_CTRL_VLAN_ADD 0
#define VIRTIO_NET_CTRL_VLAN_DEL 1
/*
* Control link announce acknowledgement
*
* The command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that
* driver has recevied the notification; device would clear the
* VIRTIO_NET_S_ANNOUNCE bit in the status field after it receives
* this command.
*/
#define VIRTIO_NET_CTRL_ANNOUNCE 3
#define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0
struct virtio_net_ctrl_hdr {
uint8_t class;
uint8_t cmd;
} __attribute__((packed));
typedef uint8_t virtio_net_ctrl_ack;
#define VIRTIO_NET_OK 0
#define VIRTIO_NET_ERR 1
#define VIRTIO_MAX_CTRL_DATA 2048
struct virtio_pmd_ctrl {
struct virtio_net_ctrl_hdr hdr;
virtio_net_ctrl_ack status;
uint8_t data[VIRTIO_MAX_CTRL_DATA];
};
struct vq_desc_extra {
void *cookie;
uint16_t ndescs;
uint16_t next;
};
struct virtqueue {
struct virtio_hw *hw; /**< virtio_hw structure pointer. */
union {
struct {
/**< vring keeping desc, used and avail */
struct vring ring;
} vq_split;
struct {
/**< vring keeping descs and events */
struct vring_packed ring;
bool used_wrap_counter;
uint16_t cached_flags; /**< cached flags for descs */
uint16_t event_flags_shadow;
} vq_packed;
};
uint16_t vq_used_cons_idx; /**< last consumed descriptor */
uint16_t vq_nentries; /**< vring desc numbers */
uint16_t vq_free_cnt; /**< num of desc available */
uint16_t vq_avail_idx; /**< sync until needed */
uint16_t vq_free_thresh; /**< free threshold */
void *vq_ring_virt_mem; /**< linear address of vring*/
unsigned int vq_ring_size;
union {
struct virtnet_rx rxq;
struct virtnet_tx txq;
struct virtnet_ctl cq;
};
rte_iova_t vq_ring_mem; /**< physical address of vring,
* or virtual address for virtio_user. */
/**
* Head of the free chain in the descriptor table. If
* there are no free descriptors, this will be set to
* VQ_RING_DESC_CHAIN_END.
*/
uint16_t vq_desc_head_idx;
uint16_t vq_desc_tail_idx;
uint16_t vq_queue_index; /**< PCI queue index */
uint16_t offset; /**< relative offset to obtain addr in mbuf */
uint16_t *notify_addr;
struct rte_mbuf **sw_ring; /**< RX software ring. */
struct vq_desc_extra vq_descx[0];
};
/* If multiqueue is provided by host, then we suppport it. */
#define VIRTIO_NET_CTRL_MQ 4
#define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET 0
#define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1
#define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000
/**
* This is the first element of the scatter-gather list. If you don't
* specify GSO or CSUM features, you can simply ignore the header.
*/
struct virtio_net_hdr {
#define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 /**< Use csum_start,csum_offset*/
#define VIRTIO_NET_HDR_F_DATA_VALID 2 /**< Checksum is valid */
uint8_t flags;
#define VIRTIO_NET_HDR_GSO_NONE 0 /**< Not a GSO frame */
#define VIRTIO_NET_HDR_GSO_TCPV4 1 /**< GSO frame, IPv4 TCP (TSO) */
#define VIRTIO_NET_HDR_GSO_UDP 3 /**< GSO frame, IPv4 UDP (UFO) */
#define VIRTIO_NET_HDR_GSO_TCPV6 4 /**< GSO frame, IPv6 TCP */
#define VIRTIO_NET_HDR_GSO_ECN 0x80 /**< TCP has ECN set */
uint8_t gso_type;
uint16_t hdr_len; /**< Ethernet + IP + tcp/udp hdrs */
uint16_t gso_size; /**< Bytes to append to hdr_len per frame */
uint16_t csum_start; /**< Position to start checksumming from */
uint16_t csum_offset; /**< Offset after that to place checksum */
};
/**
* This is the version of the header to use when the MRG_RXBUF
* feature has been negotiated.
*/
struct virtio_net_hdr_mrg_rxbuf {
struct virtio_net_hdr hdr;
uint16_t num_buffers; /**< Number of merged rx buffers */
};
/* Region reserved to allow for transmit header and indirect ring */
#define VIRTIO_MAX_TX_INDIRECT 8
struct virtio_tx_region {
struct virtio_net_hdr_mrg_rxbuf tx_hdr;
struct vring_desc tx_indir[VIRTIO_MAX_TX_INDIRECT]
__rte_aligned(16);
};
static inline int
desc_is_used(struct vring_packed_desc *desc, struct virtqueue *vq)
{
uint16_t used, avail, flags;
flags = virtqueue_fetch_flags_packed(desc, vq->hw->weak_barriers);
used = !!(flags & VRING_PACKED_DESC_F_USED);
avail = !!(flags & VRING_PACKED_DESC_F_AVAIL);
return avail == used && used == vq->vq_packed.used_wrap_counter;
}
static inline void
vring_desc_init_packed(struct virtqueue *vq, int n)
{
int i;
for (i = 0; i < n - 1; i++) {
vq->vq_packed.ring.desc[i].id = i;
vq->vq_descx[i].next = i + 1;
}
vq->vq_packed.ring.desc[i].id = i;
vq->vq_descx[i].next = VQ_RING_DESC_CHAIN_END;
}
/* Chain all the descriptors in the ring with an END */
static inline void
vring_desc_init_split(struct vring_desc *dp, uint16_t n)
{
uint16_t i;
for (i = 0; i < n - 1; i++)
dp[i].next = (uint16_t)(i + 1);
dp[i].next = VQ_RING_DESC_CHAIN_END;
}
/**
* Tell the backend not to interrupt us. Implementation for packed virtqueues.
*/
static inline void
virtqueue_disable_intr_packed(struct virtqueue *vq)
{
if (vq->vq_packed.event_flags_shadow != RING_EVENT_FLAGS_DISABLE) {
vq->vq_packed.event_flags_shadow = RING_EVENT_FLAGS_DISABLE;
vq->vq_packed.ring.driver->desc_event_flags =
vq->vq_packed.event_flags_shadow;
}
}
/**
* Tell the backend not to interrupt us. Implementation for split virtqueues.
*/
static inline void
virtqueue_disable_intr_split(struct virtqueue *vq)
{
vq->vq_split.ring.avail->flags |= VRING_AVAIL_F_NO_INTERRUPT;
}
/**
* Tell the backend not to interrupt us.
*/
static inline void
virtqueue_disable_intr(struct virtqueue *vq)
{
if (vtpci_packed_queue(vq->hw))
virtqueue_disable_intr_packed(vq);
else
virtqueue_disable_intr_split(vq);
}
/**
* Tell the backend to interrupt. Implementation for packed virtqueues.
*/
static inline void
virtqueue_enable_intr_packed(struct virtqueue *vq)
{
if (vq->vq_packed.event_flags_shadow == RING_EVENT_FLAGS_DISABLE) {
vq->vq_packed.event_flags_shadow = RING_EVENT_FLAGS_ENABLE;
vq->vq_packed.ring.driver->desc_event_flags =
vq->vq_packed.event_flags_shadow;
}
}
/**
* Tell the backend to interrupt. Implementation for split virtqueues.
*/
static inline void
virtqueue_enable_intr_split(struct virtqueue *vq)
{
vq->vq_split.ring.avail->flags &= (~VRING_AVAIL_F_NO_INTERRUPT);
}
/**
* Tell the backend to interrupt us.
*/
static inline void
virtqueue_enable_intr(struct virtqueue *vq)
{
if (vtpci_packed_queue(vq->hw))
virtqueue_enable_intr_packed(vq);
else
virtqueue_enable_intr_split(vq);
}
/**
* Dump virtqueue internal structures, for debug purpose only.
*/
void virtqueue_dump(struct virtqueue *vq);
/**
* Get all mbufs to be freed.
*/
struct rte_mbuf *virtqueue_detach_unused(struct virtqueue *vq);
/* Flush the elements in the used ring. */
void virtqueue_rxvq_flush(struct virtqueue *vq);
int virtqueue_rxvq_reset_packed(struct virtqueue *vq);
int virtqueue_txvq_reset_packed(struct virtqueue *vq);
static inline int
virtqueue_full(const struct virtqueue *vq)
{
return vq->vq_free_cnt == 0;
}
static inline int
virtio_get_queue_type(struct virtio_hw *hw, uint16_t vtpci_queue_idx)
{
if (vtpci_queue_idx == hw->max_queue_pairs * 2)
return VTNET_CQ;
else if (vtpci_queue_idx % 2 == 0)
return VTNET_RQ;
else
return VTNET_TQ;
}
#define VIRTQUEUE_NUSED(vq) ((uint16_t)((vq)->vq_split.ring.used->idx - \
(vq)->vq_used_cons_idx))
void vq_ring_free_chain(struct virtqueue *vq, uint16_t desc_idx);
void vq_ring_free_chain_packed(struct virtqueue *vq, uint16_t used_idx);
void vq_ring_free_inorder(struct virtqueue *vq, uint16_t desc_idx,
uint16_t num);
static inline void
vq_update_avail_idx(struct virtqueue *vq)
{
virtio_wmb(vq->hw->weak_barriers);
vq->vq_split.ring.avail->idx = vq->vq_avail_idx;
}
static inline void
vq_update_avail_ring(struct virtqueue *vq, uint16_t desc_idx)
{
uint16_t avail_idx;
/*
* Place the head of the descriptor chain into the next slot and make
* it usable to the host. The chain is made available now rather than
* deferring to virtqueue_notify() in the hopes that if the host is
* currently running on another CPU, we can keep it processing the new
* descriptor.
*/
avail_idx = (uint16_t)(vq->vq_avail_idx & (vq->vq_nentries - 1));
if (unlikely(vq->vq_split.ring.avail->ring[avail_idx] != desc_idx))
vq->vq_split.ring.avail->ring[avail_idx] = desc_idx;
vq->vq_avail_idx++;
}
static inline int
virtqueue_kick_prepare(struct virtqueue *vq)
{
/*
* Ensure updated avail->idx is visible to vhost before reading
* the used->flags.
*/
virtio_mb(vq->hw->weak_barriers);
return !(vq->vq_split.ring.used->flags & VRING_USED_F_NO_NOTIFY);
}
static inline int
virtqueue_kick_prepare_packed(struct virtqueue *vq)
{
uint16_t flags;
/*
* Ensure updated data is visible to vhost before reading the flags.
*/
virtio_mb(vq->hw->weak_barriers);
flags = vq->vq_packed.ring.device->desc_event_flags;
return flags != RING_EVENT_FLAGS_DISABLE;
}
/*
* virtqueue_kick_prepare*() or the virtio_wmb() should be called
* before this function to be sure that all the data is visible to vhost.
*/
static inline void
virtqueue_notify(struct virtqueue *vq)
{
VTPCI_OPS(vq->hw)->notify_queue(vq->hw, vq);
}
#ifdef RTE_LIBRTE_VIRTIO_DEBUG_DUMP
#define VIRTQUEUE_DUMP(vq) do { \
uint16_t used_idx, nused; \
used_idx = (vq)->vq_split.ring.used->idx; \
nused = (uint16_t)(used_idx - (vq)->vq_used_cons_idx); \
if (vtpci_packed_queue((vq)->hw)) { \
PMD_INIT_LOG(DEBUG, \
"VQ: - size=%d; free=%d; used_cons_idx=%d; avail_idx=%d;" \
" cached_flags=0x%x; used_wrap_counter=%d", \
(vq)->vq_nentries, (vq)->vq_free_cnt, (vq)->vq_used_cons_idx, \
(vq)->vq_avail_idx, (vq)->vq_packed.cached_flags, \
(vq)->vq_packed.used_wrap_counter); \
break; \
} \
PMD_INIT_LOG(DEBUG, \
"VQ: - size=%d; free=%d; used=%d; desc_head_idx=%d;" \
" avail.idx=%d; used_cons_idx=%d; used.idx=%d;" \
" avail.flags=0x%x; used.flags=0x%x", \
(vq)->vq_nentries, (vq)->vq_free_cnt, nused, \
(vq)->vq_desc_head_idx, (vq)->vq_split.ring.avail->idx, \
(vq)->vq_used_cons_idx, (vq)->vq_split.ring.used->idx, \
(vq)->vq_split.ring.avail->flags, (vq)->vq_split.ring.used->flags); \
} while (0)
#else
#define VIRTQUEUE_DUMP(vq) do { } while (0)
#endif
#endif /* _VIRTQUEUE_H_ */