83 lines
3.5 KiB
Plaintext
Executable file
83 lines
3.5 KiB
Plaintext
Executable file
|
|
Silicom Bypass RD Control Utility
|
|
|
|
1. Compiling the utility.
|
|
|
|
# make
|
|
# make install
|
|
|
|
2. Using.
|
|
|
|
Usage: bprdctl <dev <dev number, min 0> port <port_num, min 1> <command> [parameters]
|
|
bprdctl <info|help>
|
|
<command> - bypass control command (see Commands List).
|
|
[parameters] - set_bypass_wd command:
|
|
WDT timeout interval, msec (0 for disabling WDT).
|
|
blink_test command:
|
|
LED blinking timeout interval, sec.
|
|
set_bypass/set_bypass_pwoff/set_bypass_pwup/set_dis_bypass commands:
|
|
on/off for enable/disable Bypass
|
|
set_std_nic command:
|
|
on/off for enable/disable Standard NIC mode
|
|
set_tx command:
|
|
on/off for enable/disable transmit
|
|
set_tpl command:
|
|
on/off for enable/disable TPL
|
|
set_hw_reset command:
|
|
on/off for enable/disable hw_reset
|
|
set_tap/set_tap_pwup/set_dis_tap commands:
|
|
on/off for enable/disable TAP
|
|
set_disc/set_disc_pwup/set_dis_disc commands:
|
|
on/off for enable/disable Disc
|
|
set_wd_exp_mode command:
|
|
bypass/tap/disc for bypass/tap/disc mode
|
|
info - print Program Information.
|
|
help - print this message.
|
|
Commands List:
|
|
set_bp_manuf - set factory settings
|
|
is_bypass - check if device is a Bypass/TAP controlling device
|
|
get_bypass_slave - get the second port participate in the Bypass/TAP pair
|
|
get_bypass_caps - obtain Bypass/TAP capabilities information
|
|
get_wd_set_caps - obtain watchdog timer settings capabilities
|
|
get_bypass_info - get bypass/TAP info
|
|
set_bypass - set Bypass mode state
|
|
get_bypass - get Bypass mode state
|
|
get_bypass_change - get change of Bypass mode state from last status check
|
|
set_dis_bypass - set Disable Bypass mode
|
|
get_dis_bypass - get Disable Bypass mode state
|
|
set_bypass_pwoff - set Bypass mode at power-off state
|
|
get_bypass_pwoff - get Bypass mode at power-off state
|
|
set_bypass_pwup - set Bypass mode at power-up state
|
|
get_bypass_pwup - get Bypass mode at power-up state
|
|
set_std_nic - set Standard NIC mode of operation
|
|
get_std_nic - get Standard NIC mode settings
|
|
set_bypass_wd - set watchdog state
|
|
get_bypass_wd - get watchdog state
|
|
get_wd_time_expire - get watchdog expired time
|
|
reset_bypass_wd - reset watchdog timer
|
|
set_tx - set transmit enable / disable
|
|
get_tx - get transmitter state (enabled / disabled)
|
|
set_tpl - set TPL enable / disable
|
|
get_tpl - get TPL state (enabled / disabled)
|
|
set_hw_reset - set hw_reset enable / disable
|
|
get_hw_reset - get hw_reset (enabled / disabled)
|
|
set_tap - set TAP mode state
|
|
get_tap - get TAP mode state
|
|
get_tap_change - get change of TAP mode state from last status check
|
|
set_dis_tap - set Disable TAP mode
|
|
get_dis_tap - get Disable TAP mode state
|
|
set_tap_pwup - set TAP mode at power-up state
|
|
get_tap_pwup - get TAP mode at power-up state
|
|
set_disc - set Disc mode state
|
|
get_disc - get Disc mode state
|
|
get_disc_change - get change of Disc mode state from last status check
|
|
set_dis_disc - set Disable Disc mode
|
|
get_dis_disc - get Disable Disc mode state
|
|
set_disc_pwup - set Disc mode at power-up state
|
|
get_disc_pwup - get Disc mode at power-up state
|
|
set_wd_exp_mode - set adapter state when WDT expired
|
|
get_wd_exp_mode - get adapter state when WDT expired
|
|
|
|
Example: bprdctl dev 0 port 1 set_bypass_wd 5000
|
|
|